Ctronics CTIPC Series Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження Ctronics CTIPC Series. Ctronics CTIPC Series 10 сторінок.

Друкувати сторінку

Set up the camera

The camera starts to run immediately after connection with power supply. It can

be used as a standalone video recorder.

It's recommended to connect the camera with your mobile device or PC. After the

setup, you'll be able to access the camera more conveniently. There're 3 ways to

set up the camera: with mobile application, with PC software, with PC browser.

2.1 Set up the camera with mobile application

No LAN cable is required if you set up the camera with mobile application.

Step

1: Preparation

1.Download mobile application "Ctronics" from Google Play or App Store

to your mobile device;

2.Connect the camera to power supply and keep it close to your

mobile device.

Step 2:

Connect the camera to mobile device

1.Enter WLAN settings of your mobile device, find the network named

"IPCAM-XXXXXX" in the network list. This is the network of the camera.

2.Connect this network with password "01234567", your mobile device will

be connected to the network of the camera;

Step 3:

Connect the camera to Wi-Fi network

1.Open mobile application "Ctronics" on mobile device, you may add the

camera either by "Scan QR Code add UID" or "Search camera from LAN;

The camera will be displayed with status "Online". (Picture 1)

2.Click on Setting icon on the interface (Picture 1) to enter camera setting

menu. Go to Wi-Fi setting, click on Wi-Fi manager, select your Wi-Fi

network in the list, input your Wi-Fi password and save the setting. The

camera is now connected to your Wi-Fi network.

-03-

Picture 1

-www.ctronics-tech.com-

2.2 Set up the camera with PC/MAC Software

LAN cable is required if you set up the camera with PC/MAC software.

Step 1

: Preparation

1.Download and install PC/MAC software "HiP2P" from Support -

Download of Ctronics website

2.Connect the camera to power supply;

3.Connect the camera to the router by LAN cable. Make sure that your

PC/MAC and your camera are in the same local network.

Step 2:

Connect the camera in HiP2P software

1.Run "HiP2P" software on your computer;

*By default, there's no password for the software. You may leave the

password blank.

2.Click on Auto-Add icon on the menu bar (Picture 2).

3.The software will find and add the camera automatically. Within a few

seconds, the camera will be displayed on the interface with status

"Online" (Picture 2).

Step 3:

Connect the camera to Wi-Fi network

1.Click on Settings icon on the menu bar (picture 3);

2.Click on Parameter settings, select the camera XXXX-XXXXXX-XXXXX

(camera UID) under Region, click on Wi-Fi, Wi-Fi setting window will

appear;

3.Click on Search to show all available Wi-Fi network, select your Wi-Fi

network, input your Wi-Fi password (Key) and Apply the setting. The

camera is now connected to your Wi-Fi network.

-04-

www.ctronics-tech.com

;

Picture 2

-www.ctronics-tech.com-