Unconfigure Network Access
The Unconfigure Network Access option enables you to reset network settings
including network access control lists (ACLs) to factory default settings. Select
Unconfigure Network Access and press Enter. Press Y or N when prompted.
If you press Y, the following options will be displayed.
Option
Full Unprovision Used to reset all the Intel AMT settings to the factory default settings
except the MEBx password.
Partial
Used to reset all the Intel AMT settings to the factory default settings
Unprovision
except the PID/PPS and the MEBx password.
Remote Setup And Configuration
Select Remote Setup And Configuration and press Enter. The INTEL(R)
AUTOMATED SETUP AND CONFIGURATION window opens. The following
options will be displayed:
v "Current Provisioning Mode"
v "Provisioning Record"
v "RCFG" on page 16
v "Provisioning Server IPV4/IPV6" on page 16
v "Provisioning Server FQDN" on page 16
v "TLS PSK" on page 16
v "TLS PKI" on page 16
Current Provisioning Mode: The Current Provisioning Mode option shows you
the current provisioning TLS mode: None, PKI (Public Key Infrastructure), or PSK
(Pre-shared Key).
Provisioning Record: The Provisioning Record option shows you the provision
PSK or PKI record data of your computer. If no data has been entered, a message
will be displayed indicating that the provision record is not present. If the record
data has been entered, the following provision records will be displayed:
v TLS provisioning mode – Displays the current configuration mode of the system:
None, PSK, or PKI.
v Provisioning IP – Displays the IP of the setup and configuration server.
v Date of Provision – Displays the date and time of the provision.
v DNS – Indicates whether the PKI DNS suffix was configured in the Intel MEBX
before remote configuration takes effect. A value of 0 indicates that the PKI DNS
suffix was not configured. A value of 1 indicates that the PKI DNS suffix was
configured.
v Host Initiated – Displays whether the setup and configuration process was
initiated by the host: No indicates the setup and configuration process was not
initiated by the host; Yes indicates the setup and configuration process was
initiated by the host. (PKI only)
v Hash Data – Displays the 40-character certificate hash data. (PKI only)
v Hash Algorithm – Describes the hash type. Currently only SHA1 (Secure Hash
Algorithm 1) is supported. (PKI only)
v Is Default – Displays Yes if the Hash algorithm is the default algorithm.
Displays No if the hash algorithm is not the default algorithm. (PKI only)
Chapter 5. Intel AMT setup and configuration on Lenovo ThinkCentre M90p desktop computers
Description
15
Друкувати сторінку