Lenovo ThinkCentre Types 8288 Посібник із заміни обладнання - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник із заміни обладнання для Робочий стіл Lenovo ThinkCentre Types 8288. Lenovo ThinkCentre Types 8288 44 сторінки. Lenovo personal computer hardware replacement guide

Друкувати сторінку

11. On the new system board, release and pivot the locking lever, then pivot the

12. Position the microprocessor so that the notches on the microprocessor are

13. Using the vacuum pen 1 , lower the microprocessor straight down into the

14. Position the heat sink on the heat sink mounting bracket and align the four

Hardware Replacement Guide

microprocessor retainer until it is open.

Note: There will be a black plastic cover on the retainer to protect the

microprocessor socket. As you close the microprocessor retainer, remove the

black plastic cover. Place the black plastic cover on the microprocessor retainer

of the defective system board.

aligned with the tabs in the microprocessor socket.

Important

To avoid damaging the microprocessor contacts, do not tilt the

microprocessor when installing it into the socket.

microprocessor socket, and secure the microprocessor.

holes of the heat sink with the holes on the system board.