Lenovo ThinkSmart Hub 500 Посібник з розгортання - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник з розгортання для Робочий стіл Lenovo ThinkSmart Hub 500. Lenovo ThinkSmart Hub 500 21 сторінка. Hardware deployment guide for all uc platforms
Також для Lenovo ThinkSmart Hub 500: Посібник з безпеки, гарантії та налаштування (8 сторінок), Посібник з розгортання (10 сторінок)

Lenovo ThinkSmart Hub 500

Deployment Guide

A lock as highlighted in red below locks the arm in place. Pushing the lock to the right will release the

arm. A similar mechanism is extended to the HDMI-IN cable as well and is highlighted in the picture

below. To release the arm for the HDMI-IN, push the lock to the left to open the arm that secures the

HDMI-IN cable.

Insert the cables to the appropriate ports and then align the cables into the corresponding grooves and

then close the arm and secure it to the lock (shown below)

Note: Upto 40lbs of force might be required to lock the arm in place.

Once all the cables are securely connected and locked in place. Close the cable management bay to look

as shown below.

Push Button Reset (PBR)

Lenovo Hub 500 supports Windows Push Button Reset (PBR) functionality. This feature restores the Hub

to its factory state.

To reset the Hub 500 to factory state,

1. Connect an external keyboard to the Hub 500 via one of the USB ports

2. Restart the Hub or power-off and power-on the Hub, at the beginning of the boot process keep

tapping on the F11 key on the keyboard. This will open the Windows Recovery Environment.

3. Select "Troubleshoot"