Lenovo 42U 1200 mm Deep Dynamic Rack Посібник з монтажу - Сторінка 28
Переглянути онлайн або завантажити pdf Посібник з монтажу для Сервер Lenovo 42U 1200 mm Deep Dynamic Rack. Lenovo 42U 1200 mm Deep Dynamic Rack 42 сторінки.
Друкувати сторінку
Using a flat-blade screwdriver
Complete the following steps to install a cage nut with a flat-blade screwdriver.
Figure 18. Installing cage nuts with a flat-blade screwdriver
1. Determine the hole in which you want to install the cage nut.
2. Hold the cage nut in one hand and compress the cage-nut clip with a flat-blade screwdriver.
3. With the clip compressed, push the edge of the cage nut fully into the hole from the inside of the
rack-mounting flange.
4. Release the screwdriver pressure on the clip to lock the cage nut into place.
Installing devices vertically in the rack
The racks come with space on the sides that can be used to vertically mount power distribution units (PDUs)
and console switches. The racks come with six locations, three on each side of the rack. See the
documentation that comes with your PDU or console switch for detailed instructions for installing a device
vertically in a rack.
28