Lenovo 61BB-MAR6-WW Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Lenovo 61BB-MAR6-WW. Lenovo 61BB-MAR6-WW 41 сторінка. Flat panel monitor

4. Connect one end of the USB 3.0 cable to the USB connector on the back of the computer,

and the other end to the upstream USB connector on the monitor.

5. Connect one end of the HDMI cable to the HDMI connector on the back of the computer,

and the other end to the HDMI connector on the monitor. Lenovo recommends that

customers who require to use the HDMI input on their monitor purchase the "Lenovo

HDMI to HDMI cableOB47070".

For more information, go to the following:

www.lenovo.com/support/monitoraccessories

6. Plug the monitor power cord and the computer cord into grounded electrical outlets.

Note: A certified power supply cord has to be used with this equipment. The relevant national

installation and/or equipment regulations shall be considered. A certified power supply cord not

lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation

H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be

of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.

Chapter 1. Getting started 1-7