Lenovo K6 Посібник - Сторінка 7

During SAR testing, this device was set to transmit at its highest

certiﬁed power level in all tested frequency bands, and placed in

positions that simulate RF exposure in usage against the head with no

separation, and near the body with the separation of 10 mm. Although

the SAR is determined at the highest certiﬁed power level, the actual

SAR level of the device while operating can be well below the

maximum value. This is because the phone is designed to operate at

multiple power levels so as to use only the power required to reach

the network. In general, the closer you are to a wireless base station

antenna, the lower the power output.

The exposure standard for wireless devices employing a unit of

measurement is known as the Speciﬁc Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6W/kg.

This device is complied with SAR for general population /uncontrolled

exposure limits in ANSI/IEEE C95.1-1992 and had been tested in

accordance with the measurement methods and procedures speciﬁed

in IEEE1528.

The FCC has granted an Equipment Authorization for this model

phone with all reported SAR levels evaluated as in compliance with

the FCC RF exposure guidelines. SAR information on this model

phone is on ﬁle with the FCC and can be found under the Display

Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:

YCNK53A48.

For this device, the highest reported SAR value for usage against the

head is 0.29 W/kg, for usage near the body is 1.39 W/kg.

While there may be differences between the SAR levels of various

phones and at various positions, they all meet the government

requirements.

SAR compliance for body-worn operation is based on a separation