Nikon Coolpix 5000 Кишеньковий посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Кишеньковий посібник для Цифрова камера Nikon Coolpix 5000. Nikon Coolpix 5000 14 сторінок. Using nikon view 4 with windows xp home edition / windows xp professional
Також для Nikon Coolpix 5000: Технічні характеристики (2 сторінок), Оновлення мікропрограми (5 сторінок), Доповнення до посібника користувача (2 сторінок), Брошура та технічні характеристики (4 сторінок), Посібник з програмного забезпечення (7 сторінок), Специфікація (3 сторінок)

Друкувати сторінку

A S

HORT

OURSE IN

IKON

OOLPIX

image icon. (You use the same procedures to

remove the icon.)

4. Press the QUAL/SIZE button to complete the

procedure.

5. Press the MENU button to hide the menu.

Preparing a Print Set

1. With the camera on and the monitor open, slide

the mode selector to Playback (the arrowhead in a

box icon), and press the MENU button.

2. Press the right point on the Multi Selector to

highlight Print Set and then press the right point

to display thumbnail images.

3. Press the left or right point on the Multi Selector

to highlight a thumbnail image and press the up

or down point one or more times to specify the

number of prints you want of that image (maxi-

mum of nine).

4. Press the QUAL/SIZE button to complete the

procedure and a screen of choices appears.

5. Highlight Done and press the right point on the

Multi Selector to select it. (You can also first

highlight the Info and Date choices and press the

right point on the Multi Selector to turn them on

or off. Date prints the date on the image and Info

prints the aperture and shutter speed used to

capture it.)

Deleting a Print Set

1. With the camera on and the monitor open, slide

the mode selector to Playback (the arrowhead in a

box icon), and press the MENU button.

2. Highlight the Delete command and press the right

point on the Multi Selector to display a list of

choices.

3. Highlight Print Set and press the right point on

the Multi Selector again to delete the print set.

4. Press the MENU button to hide the menu.

Selecting an Image Quality

With the camera in any user set, repeatedly press

the QUAL/SIZE button to cycle among HI, FINE,

BASIC, and NORMAL on the control panel or

monitor. ( HI is only available only when image size

is set to Full or 3:2)

Selecting an Image Size

With the camera in any user set hold down the

QUAL/SIZE button below the monitor and rotate

the Command Dial to cycle through the available

sizes on the control panel and monitor. All of the

sizes are listed in the table to the left. When no size is

HORT

OURSES

ITE AND

5000 P

HOTOGRAPHY

LINE

IGITAL

HOTOGRAPHY

indicated on the monitor, the image size is set to

Full. When image quality is set to HI, only Full

(no icon) and 3:2 sizes are available.

Using Clear Image Mode

1. With the camera in user set, 1, 2, or 3 press the

MENU button.

2. Press the up or down point on the Multi

Selector to highlight NR on the menu, and

press the right point to display a submenu of

choices.

3. Press the up or down point on the Multi

Selector to highlight Clear Image Mode or Off

and then press the right point to set it.

4. Press the MENU button to hide the menu and

take your photos.

Changing Exposure Modes

1. With the camera on and the mode selector on

the back of the camera set to shooting mode

(the camera icon), hold down the FUNC button

and rotate the command dial to select a user set

(page 13).

2. If in user set 1, 2, or 3, hold down MODE and

rotate the Command Dial until P (program), S

(shutter-priority), A (aperture-priority), or M

(manual) is displayed on the control panel and

monitor.

Using Flexible Program Mode

1. With the camera in user set 1, 2, or 3, and the

monitor on, hold down the MODE button and

turn the Command Dial until P (program) is

displayed on the control panel and monitor.

2. Release the Mode button and rotate the

Command Dial to set it to P* and cycle through

a number of aperture shutter speed combina-

tions.

3. When finished, rotate the Command Dial until

the P* changes back to P, select another expo-

sure mode or user set, slide the mode selector

to playback mode, or turn the camera off.

Using Shutter-Priority Mode

1. With the camera in user set 1, 2, or 3, hold

down the MODE button and turn the Com-

mand Dial until an S is displayed on the

control panel and monitor. The shutter speed is

displayed on the control panel and both shutter

speed and aperture are displayed on the

monitor.

2. Release the MODE button and turn the Com-

mand Dial to select a shutter speed.

OOKSTORE

://

HTTP

WWW

SHORTCOURSES

COM