Nikon Speedlight SB-700 Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Цифрова камера Nikon Speedlight SB-700. Nikon Speedlight SB-700 8 сторінок. Flash techniques and example photos
Також для Nikon Speedlight SB-700: Короткий посібник (24 сторінок)

Друкувати сторінку

REMOTE

WIRELESS FLASH

The Nikon SB-900, SB-700, SB-600 and

SB-R200 Speedlights can be set as Remote

units and can be triggered by using an

on-camera SB-900 or SB-700 set in "Master

Mode", directly from the built-in ﬂash on

the D700, D300, D300S, D7000, D90 or

using the SU-800 Wireless Commander.

Setting the

You can set the SB-900 for remote operation using the

Off/On/Remote/Master setting switch.

1. Turn the switch while holding down the button in the center.

2. Align the index on the Off/On/Remote/Master switch

to REMOTE.

Setting a group and channel number on the remote ﬂash units

1. Press the Function button 1, then turn the selector dial to choose

a desired group name, and press the OK button.

Group name and channel number being set appears larger.

For remote ﬂash units where the ﬂash mode and ﬂash output level

compensation values are to be set identically, place these ﬂash units

into the same group.

2. Press the Function button 2, then turn the selector dial to

choose a desired channel number, and press the OK button.

Be sure to choose the same channel number as set on the

Master ﬂash unit or in the Commander mode on your camera.

Setting the

You can set the SB-700 for Remote operation using the

Off/On/Remote/Master setting switch.

1. Turn the Off/On/Remote/Master switch while

holding down the button in the center.

2. Align the index on the Off/On/Remote/Master

switch to REMOTE.

Setting a Group and Channel number on the remote ﬂash units

[Setting group A and channel 1 (example)]

1. Press the [SEL] button to highlight the Group, choose A for group

by rotating the Selector Dial, and then press the [OK] button.

2. Press the [SEL] button to highlight the Channel, choose 1 for

channel number with the Selector Dial, and then press the [OK] button.

Be sure to choose the same channel number as set on the master ﬂash unit

SB-900

as a Wireless Remote Unit

SB-700

as a Wireless Remote Unit