Nikon Coolpix 5000 Кишеньковий посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Кишеньковий посібник для Аксесуари для фотоапаратів Nikon Coolpix 5000. Nikon Coolpix 5000 14 сторінок. Using nikon view 4 with windows xp home edition / windows xp professional
Також для Nikon Coolpix 5000: Технічні характеристики (2 сторінок), Оновлення мікропрограми (5 сторінок), Доповнення до посібника користувача (2 сторінок), Брошура та технічні характеристики (4 сторінок), Посібник з програмного забезпечення (7 сторінок), Специфікація (3 сторінок)
Друкувати сторінку
A S
C
N
C
HORT
OURSE IN
IKON
OOLPIX
Taking a Picture in Programmed Auto Mode
1. Set the mode selector on the back of the camera
to the shooting position (the camera icon),
remove the lens cap, and turn the power switch
to ON. The camera beeps once and the lens
extends out.
2. Compose the image in the viewfinder making
sure the subject that you want sharpest is in the
focus brackets in the center of the viewfinder.
3. Press the shutter button halfway down so the
camera can set focus and exposure. When these
are set, the AF lamp next to the viewfinder
glows a steady green. If the camera has prob-
lems focusing, the lamp flashes (page 65). If the
red lamp glows it means the flash will fire
when you take the picture.
4. Press the shutter button all the way down to
take the picture. The camera beeps and the AF
lamp next to the viewfinder flashes green as
the image is saved to the CompactFlash card.
5. When done, turn the power switch to OFF and
replace the lens cap.
Selecting a User Set with the FUNC Button
With the camera on and the mode selector on the
back of the camera set to shooting mode (the camera
icon), hold down the FUNC button and rotate the
command dial to display A, 1, 2, or 3 on the control
panel.
Selecting a User Set From the menu
1. With the camera on and the mode selector on
the back of the camera set to shooting mode
(the camera icon), open the monitor and press
the MENU button to display the shooting
menu.
2. The USER SETTING icon at the top of the
menu is highlighted, so just press the right
point on the Multi Selector to display a list of
user sets (the letter A and the numbers 1, 2, or 3
in boxes)
3. Press the up or down point on the Multi
Selector to select a user set, then press the right
point to set it.
4. Press the MENU button to hide the menu.
Using Menus
To display the menu in any user set, open the
monitor and press the MENU button.
To move up and down a menu to highlight
commands or icon, press the up or down point on
the Multi Selector. As you highlight a command
or icon (or tab), it turns orange and the
T
S
C
W
S
HE
HORT
OURSES
EB
ITE AND
5000 P
HOTOGRAPHY
O
-
D
P
B
N
LINE
IGITAL
HOTOGRAPHY
command's full name is displayed at the bottom
or top of the monitor. (On the Set-up and Play
Back menus the command names are spelled out
right on the menu.)
To move between tabs 1 and 2 on the shooting
menu in user sets 1, 2, and 3, highlight the first or
last item on the menu and press the up or down
points on the Multi Selector. You can also press
the left point to highlight one of the tabs, the up or
down point to highlight the desired tab, then the
right point to activate the menu. You can also
move to Page 2 of the menu by pressing the
MENU button but only when PAGE 2 is displayed
above or below the menu.
To display a submenu when a highlighted
menu command displays a solid right-pointing
arrowhead, press the right point on the Multi
Selector. (To hide the submenu, press the left
point.)
To set (activate) a highlighted command (one
with a hollow or outlined arrowhead), press the
right point on the Multi Selector. The setting
applies immediately.
To display the Set-up menu, press the left
point on the Multi Selector to highlight the tab for
the current menu, then press the up or down
point to highlight the S tab. Press the right point
to activate the menu. The Set-up menu is de-
scribed in detail beginning on page 123.
To hide the menu, press the MENU button
once when MENU OFF is displayed above or
below the menu.
1. With the camera in user set 1, 2, or 3, open the
monitor and press the MENU button to display
the menu.
2. Press the up or down point on the Multi
Selector to highlight the RESET ALL icon (a
letter "C") on tab 2 of the menu and press the
right point to display a submenu.
3. Press the up or down point on the Multi
Selector to highlight Reset and press the right
point to select it and reset the commands.
4. Press the MENU button to hide the menu.
1. Slide the mode selector on the back of the
camera to Playback mode (the arrowhead in a
box icon) and open the monitor to display the
last photo you took. If there isn't at least one
photo on the CF card you'll get the message
CARD CONTAINS NO IMAGES."
OOKSTORE
Resetting the menus
Reviewing Images
://
.
HTTP
WWW
4
.
SHORTCOURSES
COM