Nikon MD-4 Інструкція з експлуатації - Сторінка 14

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари для фотоапаратів Nikon MD-4. Nikon MD-4 23 сторінки. Motor drive

CONTROLS IN DETAIL

Rewind Slides 1 (R1) and 2(R2) (5)

When one LED lights up to signal that the film is

at an end, you must rewind the film. To simplify

this operation, the MD-4 features completely au-

tomatic film rewinding. Depress the lock button

on R1 and push the slide to the left. Then while

holding R1 in position, push R2 up. Immediately

the film will start rewinding. When the sound

becomes more high-pitched, this indicates the

leader has been completely rewound back into the

cartridge. To stop the rewinding action, push R2

back down and immediately R1 will spring back

into its original position.

continued

If you were using the frame counter, it moves

from "O" to the orange dot position as soon as

R2 is pushed up.

Rewinding time for a 36-exposure roll of film

with alkalinemanganese batteries is approxi-

mately 8 sec.; with the optional MN-2 NiCd Bat-

tery Unit, it is reduced to 4.5 sec.

Note: If the film is automabcally rewound in cold weather,

static electncity charges may cause accidental expasures re-

sembling lightningLalts to appear an the film. To prevent this

from happening, push R1 to the leff and rewind the film slowly

by hand with the camera's film rewind crank.

Distributed by WWW.LENSINC.NET