Nikon WP-CP2 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для фотоапаратів Nikon WP-CP2. Nikon WP-CP2 26 сторінок. Waterproof case

Check for Leaks

Important!

Before placing the camera in the case, be sure that the camera is function-

ing normally and that the case does not leak. Failure to check for leaks

before use could result in irreparable damage to the camera.

Close the case

After making sure that the O-ring is in place,

slowly close the case, being careful not to pinch

your ﬁ ngers in the gap.

Latch the case

With front and rear halves of the case lightly

touching but the case not fully closed ( ), ﬂ ip the

buckle onto the front half of the case ( ).

Press the case closed until the latch clicks shut.

Check that the case is properly sealed, that the

O-ring is in place, and that no foreign objects are

caught in the seal.

Immerse the case

Slowly immerse the case in water, stopping if

water enters the case. Test the case in a shallow

area (1 m / 3´ or less) or in a tub or bucket. Do not

use hot water, as this could exceed the operating

temperature range of 0–40 °C (32–104 °F).