Nikon Eclipse 800 Посібник з монтажу

Переглянути онлайн або завантажити pdf Посібник з монтажу для Мікроскоп Nikon Eclipse 800. Nikon Eclipse 800 9 сторінок. Motor drive

2022/01/12 17:32

Nikon Eclipse 800 Microscope Motor Drive

Installation

This procedure steps you through the installation and alignment of the DRV-E800 motor drive onto

the Nikon Eclipse 800 microscope.

The following tools are required to install the ASI drive onto the Nikon Eclipse 800 microscope:

Small Phillips screwdriver

Small knife or ﬂat bladed instrument for prying

7/32 or 5.5mm driver wrench (provided)

5/64" hex wrench (provided)

2.5mm hex wrench (provided)

2mm hex wrench (provided)

Motor Drive Installation

The ASI z-axis drive attaches and drives the ﬁne focus shaft of the microscope. The drive assembly is

secured to the microscope via a custom ASI base plate that mounts to the microscope utilizing a

clamp assembly that secures the base plate to the bottom of the microscope. Precise alignment of the

ASI drive onto the ﬁne focus shaft of the microscope is accomplished through a triple axis sliding

adjustment bar. Installing the ASI drive assembly involves six steps:

Note: the terms left and right refer to the sides of the microscope as viewed from the

front of the microscope and assemblies.

Applied Scientiﬁc Instrumentation - https://asiimaging.com/docs/

1/9

Nikon Eclipse 800 Microscope Motor Drive Installation