Nikon Eclipse E600 Інструкція з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Nikon Eclipse E600. Nikon Eclipse E600 21 сторінка. Teaching head/multi teaching head
Також для Nikon Eclipse E600: Інструкція з експлуатації (38 сторінок), Інструкція з експлуатації (37 сторінок), Інструкція з експлуатації (37 сторінок)

Microscopy

If the system has not yet been assembled, see section "III. Assembly" first.

For details on assembling and handling the microscope, see the instruction manual supplied

with the microscope.

Depending on the type of set you have purchased, some of the components described below

may not be included.

Adjust the microscope correctly.

The secondary observer will view the same image as the main observer. If the main observer

does not adjust the microscope correctly, the secondary observer will not be able to view a

correct image. Also when the main observer did not perform the diopter adjustment, the

secondary observer is likely to have his image out-focused each time the main observer

changes the objective magnification. Be sure to perform the diopter adjustment referring to the

instruction manual supplied with the microscope.

Adjust the diopter setting at the secondary observer's position as

well.

After the main observer has adjusted the microscope correctly, the secondary observer should

bring the image into focus with the diopter adjustment rings. Set the dioptor adjustment rings

for both the left and right eyes.

Method for simple diopter adjustment

When a pointer is attached to the system, turn the respective diopter adjustment rings on the

left and right eyepieces to bring the arrow into focus. It is needed to change the arrow color to

green, and to move the arrow to near the center of view field in advance. This completes

diopter adjustment.