Nikon Elcipse TE2000 Інструкція з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Nikon Elcipse TE2000. Nikon Elcipse TE2000 7 сторінок. Fluorescent microscope
Також для Nikon Elcipse TE2000: Посібник (12 сторінок)
Друкувати сторінку
TO FINISH (...and go home):
4)
-
Close NIS-Elements BR.
-
Switch off the camera power supplies.
-
Switch off the computer before you switch off the mercury lamp. Leave the 24"
LCD monitor in standby.
-
Press the halogen transmission lamp on/off button at the base of the microscope on
the left and turn off the switch on the halogen lamp power box.
-
If the mercury fluorescence lamp is on.
Before turning off the mercury lamp allow the fluorescence mercury bulb to run
for a minimum of 30 minutes and check with the on-line booking that nobody
else will be using the microscope in the next few hours.
Switch off the power rocker switch on the mercury lamp power box and note the
time off, your name, the date and the indicated hours, in the notebook provided.
If you used the 60x oil objective please remember to wipe off the oil and inform a
member of core staff when you have finished, so that the objective can be removed
and stored away.
The 60x microscope oil objective should only be cleaned with the lens tissues
provided. The standard Nikon air objectives don't need cleaning after use.
___________________________________________________________
If you have any microscope/imaging problems or queries, just ask a member of the
Microscopy Core staff for help. There is additional help and advice on our Core web-
pages: http://www.well.ox.ac.uk/microscopy.
©WTCHG "Colour image acquisition using NIS-Elements [Basic Research] software and the
Nikon Digital Sight DS-5M Colour Camera".
This version updated: November 2012.
6