Dirt Devil BREEZE M088150 Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос Dirt Devil BREEZE M088150. Dirt Devil BREEZE M088150 12 сторінок.
Друкувати сторінку
- 1. Important Safety Instructions
- 2. Limited Warranty
- 3. Front/Back View
- 4. To Assemble Body to Nozzle
- 5. Tool Caddy
- 6. Handle to Body
- 7. To Operate
- 8. Hose Assembly
- 9. On/Off Pedal
- 10. Carry Handle
- 11. Dirt Container/Filtration
- 12. Belt/Brush Removal/Replacement
- 13. Troubleshooting
- 14. Customer Service
TOOLREQUIRED: P HILLIPSSCREWDRIVER
WARNING: TO REDUCE THERISK OFINJURYFROMMOVINGPARTS- UNPLUGCLEANERBEFORE
CHANGING BELTORBRUSHROLL,
TO REMOVEBELT
I BELT
STYLE 5 1
Laycleanerfiatandflipclean-
er to expose nozzle base.Base
shouldlay fiatandfaceup.To
remove nozzle guard, use
Phillipsscrewdriver t o remove
the four (4) screws. Arrows
showlocationof screws,
Lift and remove brushroll,
Dispose of old belt,
Lift nozzle guard off.
Slide belt off motor shaft.
TO REPLACE BELT OR BRUSHROLL
Place new belt in area of
brushrolt without bristles.
Slide belt onto motorshaft.
With new belt in place, pull
andslidebrushrollinto nozzle
makingsure[hatthebrushroll
end caps are in the correct
orientation(7a inset). Rotate
brushrolI manually to make
surebelt is properlyaligned.
Rea_achnozzleguard.
10
TAB
TAB
TAB
Secureby aligning the three
(3) tabs in the base slots.
Be sure to replace all four
(4) screws.