Cub CB-1024i Посібник зі швидкого встановлення - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Зчитувач штрих-коду Cub CB-1024i. Cub CB-1024i 4 сторінки.
Друкувати сторінкуCub CB-1024i and CB-1034i
Quick Start Installation Guide
Ribbon Installation
1. Lift open the printer
2. Install the ribbon onto
Media Door. Push the print
the ribbon supply spindle.
head release lever to open
the print head mechanism.
4. Turn the rewind spindle
5. Close the print head
clockwise 3-5 rotations until
mechanism by applying
the ribbon is smooth and
downward pressure. The
has tension.
printhead release levers will
'click' when locked in place.
4
Ribbon
Supply
Ribbon
Sensor
3. Thread the ribbon
through the ribbon sensor,
and the open space between
the print head and platen.
Tape the ribbon onto the
rewind spindle.
Ribbon Removal
1. Break or cut the ribbon
between the ribbon guide
plate and the ribbon rewind
spindle.
2. Push the ribbon release
button inward to release the
tension on the ribbon.
3. Slide of the ribbon off of
the ribbon rewind spindle
and discard.
Label Media Installation
1. Lift open the printer
2. Slide the label roll guard
Media Door. Push the print
horizontally to the end of
head release lever to open
label spindle. Place the roll
the print head mechanism.
of media on the label supply
spindle.
4. Feed the media's lead-
5. Adjust the paper guide to
ing edge forward over the
match the width of the label.
media guide bar, under the
media dampener, through
the media sensor placing
the label's leading edge
onto the platen roller.
Cub CB-1024i and CB-1034i
Quick Start Installation Guide
3. Lift the label roll guard
vertically and push forward
until the media fits gently
against the back wall of the
printer.
6. Position the media
sensor eye, indicated by the
downward triangle, until
the triangle is in the midlle
of the label. Once in place,
turn the media sensor lock
downward to hold it in
place.
5