Cub VS-95A042 Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Автомобільні аксесуари Cub VS-95A042. Cub VS-95A042 12 сторінок. Rv blind spot detection system
Друкувати сторінку
7. OPERATION
Indicator
Left Side Blind Spot Indicator
Right Side Blind Spot Indicator
POWER button
System Power
1. The system will automatically activate when the ignition is turned on. The warning
indicator lamps
2. The system may be deactivated by pressing and holding the POWER button
3 seconds, the indicator lamps
3. The system may be reactivated by pressing and holding the POWER button
3 seconds, the indicator lamps
System Activation
1. Start vehicle.
2. Indicator lamps
self-diagnostics.
3. If there are errors, the system will flash the indicator lamps
tones to indicate the problems. Please use the TROUBLESHOOTING section for
more help.
The Blind Spot Detection System will turn on when you start the engine and begin
4.
driving forward above approximately 12mph.
Blind Spot Indicator Lamps
1. The left indicator
driving. This indicator will flash and an audible tone will sound when your left turn
signal is activated while there is a vehicle in the left blind spot.
2. The right indicator
while driving. This indicator will flash and an audible tone will sound when your
right turn signal is activated while there is a vehicle in the right blind spot.
illuminate for 3 seconds during startup.
1
2
1
2
1
2
will illuminate for 3 seconds to confirm activation and run
1
2
will illuminate when a vehicle is in your left blind spot while
1
will illuminate when a vehicle is in your right blind spot
2
RV BLIND SPOT DETECTION SYSTEM: For Motorhomes | 5
will blink twice to confirm.
will illuminate for 3 seconds to confirm.
1
for
3
for
3
and sound
2