Dirt Devil F90 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос Dirt Devil F90. Dirt Devil F90 14 сторінок.
Друкувати сторінку
ATTACHMENTS
ATTACHMENT INSTALLATION AND REMOVAL
1.
2.
The hose can be used alone or with many combinations of wands and tools.
• Choose any of the accessories to meet your various cleaning needs.
Then simply push it firmly onto the handle grip or wand end (Diagram 1).
• To lengthen the cleaning wand, press button located above tool caddy and
slide excess cleaning wand out (Diagram 2).
• To remove the tool, pull apart gently. To unlock the wand, press release
button and pull apart.
NOTE: Please follow these instructions for attaching all other accessories.
CORD RELEASE / REWIND
CORD RELEASE
1.
1. Pull plug outward to unwind
cord from reel.
IMPORTANT
2
When pulling the cord, yellow tape will
identify when the cord is almost fully
extended. When red tape is visible on
the cord, the cord has reached its full
1
length. (Do not pull the cord past the
red tape.)
HOW TO OPERATE
ON/OFF BUTTON
CONTROLLING SUCTION POWER
1.
ON/OFF
SWITCH/
SUCTION
CONTROL
KNOB
CORD
CAUTION:
Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner from
falling, always place cleaner at bottom of stairs or on floor. Do nor place cleaner on stairs or furniture, as it
may result in injury or damage. When using tools, always ensure handle is in upright position.
BAREFLOOR CLEANING
CARPET CLEANING
3.
Switch to barefloor
cleaning by pressing
the height adjustment
lever down into the
flooring position.
:
CAUTION
Not to be used for
grooming a pet.
CORD REWIND
2. To return cord for storage, hold
plug and press down cord release
pedal on side of cord reel.
:
:
WARNING
Hold plug when rewinding into cord
reel. Do not allow plug to whip when
rewinding.
2.
SUCTION
Suction power can be adjusted
CONTROL VALVE
using the Handle Grip suction and
the Suction control valve on the
base unit Close for full suction or
open for reduced suction. Turning
the Power Regulator to adjust the
power of the unit.
4.
5.
Switch to carpet cleaning
by pressing the height
adjustment lever down
into the carpet position.
:
CAUTION
For
deep
To reduce the risk of
cleaning,
injury from moving
powered nozzle* or
parts- Unplug before
turbo floor nozzle.
servicing.
* On select models only.
6
carpet
use
the