Dirt Devil LET'S GO. DDW02-R01 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос Dirt Devil LET'S GO. DDW02-R01. Dirt Devil LET'S GO. DDW02-R01 20 сторінок.

CaUTiOn

Don't over saturate your carpet.

OPERATE THE CARPET WASHER

1. Plug into a mains. Turn the power and

brushbar switches on. The switches are

located on the front of the carpet washer,

above the clean water tank. The power

switch controls the motor and pump,

the brush switch only turns the rotating

brushbar on and off when the power

switch is on.

3. While pressing the solution release

trigger, push the cleaner in a forward

motion. Release the trigger and pull

the cleaner backwards over the same

path to remove the dirty water and

solution from the carpet. Repeat if

necessary.

CaUTiOn

To reduce the risk of fi re and electric shock due

to internal component damage, use only Dirt

Devil brand cleaning solution intended for use

with this appliance.

2. Press on the handle release pedal

and pull the cleaner back into a

reclined position.