Dirt Devil LET'S GO. DDW02-R01 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос Dirt Devil LET'S GO. DDW02-R01. Dirt Devil LET'S GO. DDW02-R01 20 сторінок.

CHECk FOR COlOUR FASTNESS

Before cleaning carpet/upholstery, test for colour fastness. Dampen a white cloth

with solution. Test in an inconspicuous area. Gently rub the cloth over the area.

Check each colour for colour bleeding. If the cloth remains clean, it should be safe

to clean the carpet/upholstery.

ASSEmBlY

ATTACH UPPER HANDLE

To attach the upper handle

stand the base in the

upright position. Assemble

the mid section onto the

base, taking care not to

trap internal mains wire.

To assemble the hose/

tool caddy (some models

only) align the tabs on the

hose/tool caddy with slots

on the mid section and

snap into place.

Insert the two nuts into the

recesses located on the

left and right sides of the

base. While holding the

nuts in place, insert the

two medium length screws

through the front of the

mid section and tighten.

Place nut into recess on

hose/tool caddy and hold

into place. Press handle

release with your other

hand to tilt the midsection

backwards.

CaUTiOn

To reduce the risk of fi re, electric shock, or

injury: ensure the power cord is out of the

way before attaching the upper handle.

Fit the handle into the

main body of the unit.

Hold the nut in place,

insert the long screw

through the front of the

upper handle and tighten.

Place screw through

centre of lower midsection

and tighten.