Clas Ohlson ZK-6302 Посібник із швидкого старту
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Зовнішнє освітлення Clas Ohlson ZK-6302. Clas Ohlson ZK-6302 5 сторінок. Fibre optic solar stake light
Друкувати сторінкуFibre Optic Solar Stake Light
Art.no 36-6992
Model ZK-6302
Please read the entire instruction manual before use and
then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Safety
Important
•
Handle the product with care, making sure not to damage
the surface of the solar cell and ensuring that it is not
covered with dust or affected by other contaminants.
•
Never attempt to repair or modify the product in any way.
•
Repairs must only be carried out by authorised service
personnel and only using genuine spare parts.
•
The battery must only be replaced with a rechargeable
battery.
•
Never let children play with the product.
Assembly
Join the three parts
together as indicated by
the arrows in the picture.
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail [email protected] internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Instructions for use
Information
•
When placing the product outdoors, make sure that it has
access to maximum sunlight and is not affected by other
light sources such as street lights.
•
When the battery is fully charged, the light will shine for
approximately 8 hours in the dark.
1. Set the switch on the back of the solar cell to W for a fixed
white light or to RGB for sweeping RGB colours.
2. Push the spike into the ground.
3. Adjust the angle of the solar cell so that it can receive as
much sunlight as possible.
4. The lamp comes on automatically at dusk.
Care and maintenance
•
Clean the product using a slightly damp cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
•
The rechargeable battery can be replaced as follows:
1. Remove the two screws on
the base of the solar cell
and take off the back cover.
Be careful not to
damage the cables and
the circuit board.
2. Change the battery and
make sure that it is inserted
with the correct polarity.
3. Screw on the back cover.
Troubleshooting guide
What to do if the lights do not shine:
•
Check that the power switch is in the W or RGB position.
•
The battery is discharged. Make sure the solar cell is
exposed to sunlight.
•
The solar cell is dirty. Clean it by wiping with a damp cloth.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
household waste. This applies throughout
the entire EU. In order to prevent any harm to
the environment or health hazards caused by
incorrect waste disposal, the product must
be handed in for recycling so that the material
can be disposed of in a responsible manner.
When recycling the product, take it to your
local collection facility or contact the place of
purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Specifications
1 × AAA/HR03 NiMH 300 mAh
Rechargeable battery
Charging time
7 hours (in continuous sunlight)
Operating time
8 hours (when fully charged)
Operating temperature −10 to 50 °C
Height
69 cm