ARMOUR SY001-2018-NEW Посібник - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник для Повітряний компресор ARMOUR SY001-2018-NEW. ARMOUR SY001-2018-NEW 20 сторінок.

ARMOUR SY001-2018-NEW Посібник
Only move the machine by lifting the handle.
Never pull an attached air hose to move the
machine.
The working parts of the machine can become
hot during operation. Let the machine cool
down after use.
Never use gasoline or other flammable liquids
to clean the machine. Vapours in the machine
can be ignited by a spark and cause the tool to
explode.
Keep this manual with your compressor.
If the tank leaks, switch off the machine
immediately. Have the machine repaired by an
authorised technician.
Make sure that the machine is switched off and
unplugged and that the tank is pressure free
before troubleshooting or servicing, or when the
machine is not used.
After each use the moisture collected in the
tank must be bled. Not bleeding the tank can
lead to leakage and may cause a dangerous
situation.
The following pictograms are shown on the
machine:
Wear hearing protection.
Risk of electric shock.
C
u a
o i t
! n
M
a
i h c
e n
unexpectedly.
Beware of hot parts.
Consult the manual.

ELECTRICAL SAFETY

A l ways check that the power supply
corresponds to the voltage on the rating
plate.
SYSTEM+
s
t i w
h c
s e
n o

DESCRIPTION (Fig. A)

Your compressor has been designed to supply
compressed air. The machine is suitable for the
attachment of several kinds of air tools.
The machine is also suitable for spraying paint for a
short period of time.
1 On/off switch
2 Air hose connection
3 Manometer tank pressure
4 Safety valve
5 Bleeding point tank
6 Breather pipe/cap
7 Gauge glass
8 Transport handgrip
9 Wheels
10 Air filter
Important! Before commissioning
Remove the plastic cap from the sump lid.
The gauge (7) at the bottom of the sump
indicates the oil level: this should now be level
with the red dot. (Fig. A)
Screw on the included oil cap (6). (Fig. A)
Remove the plastic cap from the cover. Screw
on the air filter (10). (Fig. A)
Warning the compressor is provided without oil!
To prevent damages, it needs to be filled with
about 300 gr. Synthetic ISO VG 46 or SAE 10W30 oil.
Connecting the air hose (Fig. B)
e B
o f
e r
u
e s
a ,
w l
y a
hose is connected properly.
e N
e v
e r
c x
e e
t d
e h
pressure of the equipment connected.
Instructions for use
Use for the first time: Remove the tank cover.
Use for the first time: Place the breather pipe
and the cap.
Check whether the tank is vented and bled.
Check the operation of the safety valve.
Check whether the air hose is connected
properly.
EN
c s
e h
k c
h w
t e
e h
t r
e h
r i a
m
x a
m i
u
m
p o
r e
i t a
g n
13