Cleaner won't run
Dust escaping from cleaner
Cleaner tools won't pick up
r
Headlight not working
l------
Cleaner is difficult to push
l - -----
Brushroll not rotating
*Sensor light will not turn
onloff
*Not available on all models
L
EDUCE RISK OF PERSONAL INJURY
-
UNP
Possible Reasons
1. Power cord not firmly plugged into outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
1. Dirt container not installed correctly.
2. Dirt container full.
3. Brushroll worn.
4. Broken belt.
5. Clogged PERMA FILTERa.
6. Dirty HEPA filter.
7. Clear nozzle dirt passage hose clogged.
8. Carpet height setting is incorrect.
9. Lower hose inlet clogged.
10. Brushroll turned off.
1. Dirt container full.
2. Dirt codainer not installed correctly.
1. Attachment hose clogged.
2. Dirt container full.
3. Filter clogged.
1. Bulb burnt out.
2. Loose electrical wires.
1. Carpet height setting is incorrect.
2. Brushroll onloff switch is turned "off".
1. Brushroll onloff switch is turned off.
2. Broken belt.
3. Brushroll jammed with an obstruction.
1. Needs service.
1. Height adjust setting is too low.
2. Cleaner needs service.
G CLEANER BEFORE SERVICING
Possible Solutions
1. Plug cord in firmly.
2. Check fuse or breaker in home. Replace fuselresc
breaker.
3. Take to service center or call 1-800-321 -1 134.
1. Review dirt container removal and replacement
-
Pg.
I
2. Empty dirt container
-
Pg. 6.
3. Take to servicecenter or call 1-800-321-1 134.
4. Take to service center or call 1-800-321-1 134.
5. Remove PERMA FILTERa and clean
-
Pg. 6.
6. Replace HEPA filter
-
Pg. 7.
7. Remove dirt cup; inspect hose; remove obstructior
8. Set carpet height adjustment to appropriate
setting for carpet being cleaned
-
Pg. 5.
9. Remove dirt cup and clean inlet.
10. Turn brushroll on
-
Pg. 5.
1. Empty dirt container
-
Pg. 6.
2. Review dirt contziner wmwal
and
replacement
-
Pg. f
1. Remove dirt cup; inspect hose; remove obstruction.
If necessary, remove 2 screws to remove attach
ment hose and clear obstruction
-
Pg. 5.
2. Empty dirt container
-
Pg.
6.
3. Clean filter
-
Pg. 6.
1. Replace bulb
-
Pg. 7.
2. Call 1-800-321-1 134 for nearest authorized
Royala Dealer.
1. Set carpet height adjustment to appropriate
setting for carpet being cleaned
-
Pg. 5.
2. Turn brushroll onloff switch to the "on" position.
1. Turn brushroll on/off switch to the on position.
2. Take to Service Center or call 1-800-321-1134.
3. Turn the brushroll onloff switch to the "off" posi-
tion. Turn the unit off and unplug. Remove the
obstruction. Plug unit back into outlet and turn the
power and brushroll switches to the "on" position.
1 ..'~ake to service center or call 1-800-321-1 134.
1. Set height adjust to proper setting
-
Pg. 5.
2. ,Call customer service at 1-800-321 -1 134.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE
(1 -800-321 -1 134)
In the event that further assistance is required, see yourYellow Pages for an authorized Royala Dealer. Costs of any transportation to and
from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from an
authorized Royal" Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when requesting informa-
tion or ordering replacement parts. (The model number appears on the back of the cleaner.)
Друкувати сторінку