Armstrong 3403 Посібник з монтажу та обслуговування - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з монтажу та обслуговування для Блок управління Armstrong 3403. Armstrong 3403 20 сторінок. Water temperature controls groups of fixtures - thermostatic

Друкувати сторінку

Step 1

a. Unscrew the set screw.

b. Remove the Backplate.

Step 3

a. Important! Prior to assembly of the hot and cold

adapters, look inside each one and ensure that there

is a strainer and a white plastic checkvalve. The

adapter with nothing inside is for the outlet.

Thread the coupling nuts onto the Valve assembly

then tighten using an adjustable spanner.

Caution! Use a soft cloth to protect the plating

from damage while tightening the spanner.

Step 2

Ø 6 mm

2.5 mm

a. Use the Backplate to mark the four mounting holes at

the desired height.

b. Drill the holes (6 mm) and fit the wall anchors. Screw

the Backplate to the wall.

Caution! Avoid area where underground wirings

or pipelines pass through.

Step 4

a. Mount the Valve assembly on the Backplate fixed on

the wall. Make sure the Valve assembly locks in the

groove.

b. Tighten the set screw.

6.0 mm

2.5 mm