3Com 3108 Посібник з кодування - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з кодування для Телефон 3Com 3108. 3Com 3108 16 сторінок. Nbx feature codes guide for sip telephones
Також для 3Com 3108: Довідковий посібник (2 сторінок)

3Com 3108 Посібник з кодування
Table 3 NBX Feature Codes (continued)
Features
Password — Change
Use this code sequence to change
your NBX NetSet utility password.
Redial
Redial the last number that was
called on this telephone.
Speed Dial — Personal List
Dial a party to whose number you
have given a personal speed dial
number.
Range: 601 – 699
Speed Dials — System-Wide
List
Use this code sequence to dial
any of the system-wide speed dial
numbers that have been assigned
by the administrator.
Range: 700 to 799
Voice Mailbox
If your NBX system is set up with
3Com IP Messaging, use this
code sequence in lieu of a Msg
button to access your voice
mailbox.
Using Codes
Press *
+ 434
+ *
+ old password
+ *
+ new password
+ *
+ repeat your new
password
+ Send
Press *
+ 401
+Send
Press *
+ personal speed dial
number
+Send
Press *
+ system-wide speed
dial number
+Send
Press *
+ 600
+Send
Enter your voice mail
password when
prompted.
How to Enter a Feature Code
Notes
When typing your password:
Use only 4- to 10-digit numbers
Do not use letters, *, or # as part of your password.
After you set your NBX NetSet password, you must set
the SIP authentication password in your SIP telephone
to match the new NBX NetSet password.
You can assign and print out your speed dial numbers
by logging in to the NBX Netset utility and going to
Directory > Personal Speed Dial.
You can view and print out the available system-wide
speed dial numbers by logging in to the NBX NetSet
utility and going to Directory > System-Wide Speed
Dial.
15