Dirty Hand Tools 104950 Посібник з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Електроінструмент Dirty Hand Tools 104950. Dirty Hand Tools 104950 20 сторінок. Vibratory plate compactor

Друкувати сторінку

1. Exciter Lubrication

Operating Instructions

Preparation for Operation

UNIT IS SHIPPED WITHOUT OIL IN THE ENGINE.

ADD OIL BEFORE STARTING THE ENGINE

Check the oil level before each operation.

Fill Engine with Oil

1. Add oil according to engine manual. Do not overfill. Use

SAE30 engine oil. Do not mix oil with gasoline. Oil level

must be full. Check the oil level by removing the dipstick (see

Figure 5).

Pre-Start Inspection

1. Make sure all nuts, bolts and hardware are in place and secure.

2. Check oil level.

3. Inspect air cleaner (see engine manual). Clean or replace as

needed.

4. Check fuel supply. Fill the fuel tank no closer than 1 inch

from top of tank to provide space for expansion.

5. Examine underneath and around engine for oil or fuel leaks.

6. Inspect fuel hoses for tightness and fuel seepage.

7. Look for signs of engine damage.

8. Remove excessive debris from muffler area and recoil starter.

WARNING

OIL

DIPSTICK

Figure 5