Dirty Pro Tools QT6268 Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Повітродувка Dirty Pro Tools QT6268. Dirty Pro Tools QT6268 10 сторінок. Electric

SPECIFIC SAFTY RULES

1. Before use check the supply and extension cord for signs of damage or aging.if the cord becomes

damaged during use,disconnect the cord from supply immediately.

2. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY.Do not use the appliance if the

cord is damage or worm.

3. Read the instruction carefully.Be familiar with the controls and proper use of the equipment.

4. Keep extension cord away from cutting elements.

5. Wear protective glasses and goggles.

6. Never allow children or people unfamiliar with the instructions to use the machine.

7. Stop using the machine while people,especially children,or pets nearby

8. Only use the machine in daylight or good artificial light

9. Before using the machine and after any impact,check for signs of wear or damage and repair as

necessary.

10.Never operate the machine with damaged guards or without the guarding place

11.Keep hands and feet always from the cutting means at all times especially when switching on the

motor.

12.Take care,against injury from any device fitted for trimming the filament line length.

13.Never fit metal cutting element.

14.Never use replacement parts or accessories not provided or recommended by the manufacturer.

15.Disconnect the machine from the mians before checking,cleaning or working on the machine and

when it is not in use.

16.Inspect and maintain the trimmer regularly.Have the trimmer repaired only by an authorized

repairer.

17.Take care against injury from the blade fitted for trimming the filament length.After extending

new cutter line,always return the trimmer to its normal operating position before switching on.

18.Always ensure that ventilation openings are kept clear of debris.

19.When not in use,store the trimmer out of the reach of children.

20.For additional protection,the installation of a residual current device (RCD) having a rated

residual operating current not exceeding 30mA is advisable