ABBA STS600 Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з монтажу для Трансформатор ABBA STS600. ABBA STS600 11 сторінок.

POWER UP THE TRANSFORMER

To test the fixtures and change the mode to "ON," please follow these

instructions:

Take the plug of the transformer and insert it into the GFCI plug. Make sure

it is fully inserted and securely connected.

Once the transformer is plugged into the GFCI plug, you can proceed with

testing the fixtures. Turn on the power to the transformer.

Set the mode switch to the "ON" position. This will activate the fixtures and

provide a continuous power supply.

Observe the connected fixtures to verify that they are illuminated and

functioning correctly. Check for any signs of flickering, dimness, or

malfunctions.