Disaster Area Designs micro.ghost Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Конвертер мультимедіа Disaster Area Designs micro.ghost. Disaster Area Designs micro.ghost 4 сторінки. Usb midi interface

Disaster Area Designs micro.ghost Посібник користувача
c
OnfIguratIOn
The micro.ghost is set up from the factory to handle the most common situation - USB MIDI
device responding to MIDI channel 1, MIDI THRU enabled. But we know that every MIDI rig is
a little different, so we've provided some switches on the back side of the micro.ghost to allow
you to set it up the way you want.
FACTORY DEFAULT: ALL SWITCHES DOWN.
Receive on MIDI Channel 1, Normal LED brightness, MIDI THRU enabled, USB HOST mode.
SW1-SW4 MIDI CHANNEL ASSIGN
These set the MIDI channel assignment of the micro.ghost. Your USB device should be set
to receive on MIDI CHANNEL 1, and the micro.ghost should be set for your desired receive
channel. For example, if you want your device to respond to messages sent on MIDI channel 3
from your master controller, set SW3 to ON and leave SW1, 2, and 4 OFF.
SW5 LED BRIGHTNESS
Set ON for bright LED, OFF for normal LED.
SW6 MIDI THRU
Set ON for MIDI THRU disable, OFF for MIDI THRU enable. If MIDI THRU is disabled, messages
will be passed from the input to the USB device but not to the MIDI THRU port.
SW7 USB MODE
Set ON for USB MIDI, OFF for USB HOST. USB MIDI mode will cause the micro.ghost to func-
tion as a standard USB MIDI interface and the USB HOST port will be disabled.
SW8 UPDATE
Set ON for firmware update, OFF for normal operation. Please consult the Disaster Area web-
site for more information regarding firmware updates.
s
PecIfIcatIOns
Dimensions: 1.93" x 3.93" x 1.03" (50mm x 100mm x 27mm)
Power:
9V DC center-negative, 2.1mm pin.
60mA for self-powered USB, 500mA+ for bus-powered USB
USB Modes: MIDI HOST (converts USB MIDI device to 5-pin MIDI)
USB MIDI (acts as MIDI interface for another host)
Only one USB port may be used at a time
Indicators: RGB LED - red = no USB connection, green = USB host link, blue = USB MIDI
MIDI THRU: Passes all incoming MIDI from IN to OUT port, may be disabled
s
wItches