Armstrong Monitoring Corporation AMC-310 Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вимірювальні прилади Armstrong Monitoring Corporation AMC-310. Armstrong Monitoring Corporation AMC-310 18 сторінок. Airsense infrared co2 analyzer
Друкувати сторінку
AMC-310 AirSense Infrared CO
Analyzer
2
4 Installation
4.1 Cover Removal
To open the Model 310 use a coin in the slot on the bottom to release the snap. Lift the cover
up slightly to disengage the closure and remove cover with a downward motion to clear the
catch at the top of the unit.
The locations of the controls and terminals on the main circuit board are shown in Figure 2 on
page 8.
4.2 Mounting
The Model 310 is designed for flush mounting with two fasteners. The locations of the mounting
points (shown in Figure 1) allow direct mounting on a standard simplex (single circuit) junction
box. There is a wiring cutout in the center of the unit near the terminal strips.
Figure 1: AirSense Model 310 Mounting Dimensions
7