Disc Makers ReflexMax Series Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Дисковий дублікатор Disc Makers ReflexMax Series. Disc Makers ReflexMax Series 2 сторінки. Cd-r
Друкувати сторінку
DIRECT DISC-TO-DISC COPY
The ReflexMax has been preset to duplicate in the
Hard Drive-to-Disc mode, but can easily be set to
the Disc-to-Disc mode.
1 Power on the ReflexMax by pressing the round
button at the bottom right on the front of the unit.
The system will initialize and perform a self-test,
which will be displayed on the LCD display area.
2 When the self-test is complete, the 1. Copy dis-
play will appear on the LCD screen. Press the
DOWN arrow until 8. Select Source appears on
the display screen.
3 Press the ENT button and the following image
will appear on the display screen:
SRC: HDD
00 IDE0 Master
4 Press the DOWN arrow once. Src: CD-RW 01
IDE1 Master will be displayed on the screen. Press
the ENT button and the LCD will display CD-RW
Selected. Press ENT again.
5 Press the UP arrow to return to 1. Copy. You will
notice that P: A is no longer displayed on this
screen. P: A is only displayed when copying in the
Hard Drive-to-Disc mode (see opposite side of
this guide).
6 To start the duplication process, load the top
drive with your CD master. Load the remaining
drives with the number of CD-Rs you wish to dupli-
cate. You can duplicate from one CD-R to as many
CD-Rs as the unit can accommodate. For the best
results, always use high-quality CD-R media.
7 Press the ENT button to begin duplicating. The
unit will automatically analyze the master disc (this
may take a few seconds), and begin duplicating at
the maximum recording speed.
T
8 The LCD will display the copying progress. The
screen will display OK: when the duplication is
complete. Next to OK: will be the number of suc-
cessfully copied discs.
www.discmakers.com
Note: When the duplication process is completed, the
writer drives will automatically eject the CD-Rs that have
been duplicated successfully. The LCD screen will display
the number of copies that are OK. If any CD-Rs have not
been duplicated successfully, the LCD screen will display
the number of copies that have FAILED. The CD-Rs that
have not duplicated successfully will remain in their
drives until the eject button on the drive is pressed. For
information on why a CD-R might not copy successfully,
please see the User's Guide on the attached CD.
1-888-800-4041