Discount Car Stereo A2DIY-CDR30 Посібник зі швидкого встановлення - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Автомобільна стереосистема Discount Car Stereo A2DIY-CDR30. Discount Car Stereo A2DIY-CDR30 8 сторінок. For porsche cdr30/31 radios

Друкувати сторінку

Introduction:

Most high-end car manufacturers exceed their client's demands in most regards

but may lag behind technology when it comes to audio systems. Those wanting

support for more attractive modern media formats, we offer the A2DIY-CDR30.

This kit is compatible with virtually all Bluetooth phones, and sounds great

whether using for mobile conversations, streaming music or connecting audio

device (e.g. Mp3 player, Sat radio etc.) to the AUX input on Porsche equipped

CDR30 or CDR31 radios. Optional USB "Fast charging" port can be added to keep

power hungry devices charged and optional Push button with built-in

microphone which simplifies installation.

Installation:

Remove radio from dashboard to gain access to the connectors. (Radio removal

not covered in these instructions but may be available upon request)

With stereo removed disconnect (press release tab) 12-pin micro-

Quadlock green plug (See Fig. 1)

Factory Quadlock Plug and micro-Quadlock

Factory 12-pin micro Quadlock (Green and Blue) pictured

in Fig. 1 may or may not be present; however, Green

micro-Quadlock (if present) must be disconnected and

replaced with installation harness black micro-Quadlock

plug (See Fig. 2)

Fig. 1

Connect installation harness 12-pin black micro-Quadlock plug to slot

vacated in step 1 (See Fig. 2)

Tip: These plugs are keyed to which ensures proper fitment.

Fig. 2

Green micro-Quadlock (if present) remains disconnected

Secure black wire to ground. Use radio chassis screws to secure

ground wire (See Fig. 3) or locate alternate ground source.

Fig. 3

Run red Accessory (See Fig. 4) to suitable 12V Accessory supply

source (e.g. fuse box etc. or suggestions on next page)