Discount Car Stereo C6-HF Посібник зі швидкого встановлення - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Автомобільний приймач Discount Car Stereo C6-HF. Discount Car Stereo C6-HF 9 сторінок. Bluetooth for c6 corvette with xm tuner module

Друкувати сторінку

Fig. 7

3.5male to male audio cable

6. Route installation harness red wire to fuse panel under passenger

floor board and tap to included Add-A-Fuse circuit (See Fig.8). Locate

an accessory supply fuse (see suggestions below) for the Add-A-Fuse

circuit.

Accessory supply voltage ensures module turns "ON" and

available only when vehicle is in operation.

C6 fuse panel in passenger footwell

We suggest one of the following fuse circuits: (circled in fuse fox diagram)

1. HTD Seat/WPR RLY (Heated Seat/Wiper Relay)

2. EXL DML (Exhaust Module)

3. WPR/WSW (Windshield Wiper/Washer)

Under no circumstances should accessory wire be connected to 12V

battery (always on) supply.

Warning:

Due to the many factory options, accessory supply may inherently be

noisy (motors, sensors, modules etc.). If audio playback include noises (hum,

whine etc.), we recommend finding an alternate power supply location or adding

noise filter

7. Connect push-to-talk button/microphone (See Fig. 9) to module input

jack labeled "MIC" (See Fig. 5)

Control button/Microphone

Fig. 8

Fig. 9