Discount Car Stereo A2DIY-CHRY Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільна електроніка Discount Car Stereo A2DIY-CHRY. Discount Car Stereo A2DIY-CHRY 5 сторінок. For 1995-02chryler radios with cd changer controls

Друкувати сторінку

Bluetooth operation

7. Turn ignition and radio "ON"
8. Press "MODE" button on radio to enter Bluetooth mode (See Fig. 5)
9. Launch streaming application (e.g., Pandora, Apple music etc.)
10. Use device built-in control or media remote to change tracks, adjust
device volume, pause/play etc.
11. Place test call or ask someone to call. Press media remote
"Pause/Play" button to accept/end call.
Warning: Use smartphone built-in controls to access applications
Notes:
1.
If playback is distorted or low, adjust volume on Bluetooth device.
2. On incoming calls, ring tone and number announcement plays on car
speakers
3. Bluetooth range is approximately 30 ft. make sure device is within
range
4. *Media remote does not control Chrysler radio functions.
If successful go ahead and reinstall radio
Fig. 5
Frequent ask questions & troubleshooting
1.
Will the A2DIY-CHRY work on all radios with 8-pin "CD connector?
NO;
the A2DIY-CHRY works on 3 Chrysler CD changer controlling radios
described on page 2.
2. My radio has a MODE button. Will the A2DIY-CHRY work?
Probable not.
Radio face must have more than a "MODE" button. Refer to
question 1 for additional button/label requirements that guarantee radio
compatibly.
3. Can I use the A2DIY-CHRY to make/receive phone calls?
YES;
The A2DIY-CHRY supports Bluetooth music streaming (A2DP) and
Hands-free (HPF) profile.
4. Will I have to disconnect the CD changer?
YES,
the A2DIY-CHRY uses the 8-pin CD changer port. Any and all factory
add-ons using this port will need to be disconnected. See our
retain use of the CD changer.
5. Can I use radio buttons to control songs and text display?
YES/NO;
Depending on radio software, the SEEK button can be used to
change tracks and accept/reject phone calls, otherwise use device built-in
control and display or media remote.
6. During call number announcement, there is static like noise in
background. Is this normal?
YES. It is normal for background hiss/tone during call number
announcement. The background tone/hiss will cease as soon as
announcement ends or call taken/rejected.
Disclaimer
• This product has no affiliation with Chrysler
• We're not liable for misuse of this product.
•We recommend professional installation
© 1995-Mar-22 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.
A2D-CHRY
to