Discount Equipment CD-5 Посібник - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник для Підлогова машина Discount Equipment CD-5. Discount Equipment CD-5 13 сторінок. Air powered chip-dek scabbler
Друкувати сторінкуE-CDS-IP-6/98
READ AND UNDERSTAND THE INSTRUCTIONS THOROUGHLY
BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT.
Death or serious injury could occur if the machine is used improperly.
A safety instruction that advises that death or serious
injury will result if instructions are not followed and
caution exercised.
A safety instruction that advises that death or serious
injury can result if instructions are not followed and
caution exercised
A safety instruction that advises that injury could re-
sult if instructions are not followed.
This equipment will create dust from the material being removed. That dust
may contain a chemical known to the State of California to cause cancer
and/or birth defects or other reproductive harm. As an example, paints and
concrete contain chemicals known to the State of California to cause cancer
and/or birth defects or other reproductive harm.
Check the chemical
properties of the material to be removed and take appropriate precautions.
It is the operator's responsibility to keep other people (workers, pedestrians,
bystanders, etc.) away during operation. Block off the work area in all
directions with roping, safety netting, etc. for a safe distance. Failure to do
so may result in others being injured by flying debris or exposing them to
harmful dust and noise.
Maintain a safe operating distance from flammable materials. Sparks from
the cutting-action of this machine can ignite flammable materials or vapors.
GENERAL INSTRUCTIONS
MACHINE PRECAUTIONS
Eye and ear protection must be worn at all times when the
machine is in use. During normal
operation, sound levels may exceed 92
dB(A).
Wear appropriate clothing, footwear, and safety attire when
operating this machinery. Steel toe safety shoes, padded
gloves, non-fogging vented safety goggles or face screen,
dust respirator (when dry cutting), hard hat (when
appropriate for the job), and safety vest should be worn.
Do not wear loose clothing that can get tangled in moving
parts.
Wear an approved dust/particle respirator
when removing hazardous material or when
operating dry.
8
~
Maintain a safe operating distance to other personnel
This equipment is designed for preparation of horizontal
concrete or asphalt surfaces using Tungsten Carbide Bits.
It is controlled by a single operator from the rear of the
machine.
Read and follow all safety decals.
Avoid deck inserts, pipes, columns, openings, electrical
outlets, or any objects protruding from slab surface.
Stay alert; use common sense, and avoid unsafe conditions.
OWNER RESPONSIBILITIES:
Never allow anyone to operate the machine in an impaired
physical or mental state.
Provide all instruction manuals for the operator to fully read
and understand.
Provide proper training and instruction to the operator.
Maintain safety decals on the machine.
Maintain the machine in safe operating condition with all
guards securely in place, all mechanical fasteners tight, all
controls in working order, and the machine configured for
the job application.
Maintain a copy of the equipment's operators manual with
the machine for reference at all times.
OPERATOR RESPONSIBILITIES:
Be familiar with all aspects of the machine's operation and
controls before applying power to the equipment.
Use the correct accessory for the job being performed and
material being removed. Make sure accessories are
mounted correctly.
Never operate this machine while under the influence of
drugs or alcohol, while taking medications that impair the
senses or reactions, or when excessively tired or under
stress.
Follow the instructions in the operators manual and exercise
caution.
Never leave the machine running unattended.
Comply with all local safety and health regulations as well
as EPA and OSHA regulations.
TABLE OF CONTENTS
1 - Safety & General Instructions
2 - EDCO Model C0-5 "CHIP-DEK" Scabbier, Machine Layout
4 - Maintenance, Trouble Shooting Guide
&
10 -
(Back Cover) - Limited Equipment Warranty, Ordering replacement parts
Page 1