3d XPRO 490 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Човен. 3d XPRO 490. 3d XPRO 490 17 сторінок.

Towing

Your boat can be towed using the towing eye located at the bow. The boat must be empty when

towed. Remove outboard motor, fuel tank and equipment. No passenger should be aboard. The

boat should be towed at low speed. Make sure to use a tow line that is rated at least 5 times the

weight of the boat being towed. The boat should only be towed using the towing eye. Molded

handles, lifelines and cleats are not designed to be used for towing.

1 - It is recommended that the boat be towed with a bridle arrangement using a D-rings on the

either side of the bow.

2 - An extra safety line should be attached to the welded-on aluminium eye under the bow of

the hull.

3 - Please note that towed dinghies need to be constantly monitored and especially at night.

4 - When a dinghy is towed, the conditions may vary quite dramatically so the responsability for

its security rests entirely with the skipper.

Warning

No passenger should be onboard. Boat shall be towed at low speed. Make sure to use a

tow line that is rated at least 5 times the weight of the boat being towed

Lifting

To lift your boat or stow your boat under gravity davits, use the lifting points provided for this

purpose or have them installed by a professional.

Warning

No passenger must be onboard during lifting.

Caution

The boat must be unload of all equipment during lifting. The drain plugs must be open and

the boat must be tilting backward in order to ensure the potential water drain.