DiscountRamps Silver Spring THR4 Інструкція - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція для Підйомні системи DiscountRamps Silver Spring THR4. DiscountRamps Silver Spring THR4 4 сторінки. Aluminum modular self-supporting threshold ramp

Друкувати сторінку

Assembly

Note: When assembling ramps THR1 and THR15, please start with Step 3 in the assembly instruc-

tions for ramps THR2, THR3, THR4, THR5, and THR6, please start with Step 1.

Step 1. Align the opening on the bottom of a ramp extension

with the top of the ramp's support foot. (If the purchased ramp

has multiple ramp extension pieces, please note that the ex-

tension pieces are all the same size.)

Slide the support foot into the opening on the bottom of the

ramp extension.

Fig. 1b

Align both holes in the support foot with both holes in

the ramp extension. Once in place, use two self-tapping

screws to secure in place.

Repeat with additional support feet (if necessary).

Step 2. Once all support feet are secured to the bottom of the ramp extensions, organize sections

from lowest to highest height. Each ramp extension will have to be secured to the piece next to it.

Fig. 2a

Rev. 011620

DiscountRamps.com • 1-888-651-3431

Fig. 1a

Fig. 1c

Page 2