3D Cultures 3D Bio-Printer Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для 3D-принтери 3D Cultures 3D Bio-Printer. 3D Cultures 3D Bio-Printer 16 сторінок.

FEATURES

 Syringe-based biohead

 Inter-changeable tips

 Can print a variety of materials, cells, and biologics

 Open frame allows for ease of use.

 Includes a 256MB microSD card with Cura, Repetier-Host, and Nozzle Setup file.

CUSTOMER SERVICE & TECHNICAL SUPPORT

3D Cultures' Support team is always available to help. If you need any assistance please contact us via email

at:

This printer has an interactive screen to help with all your printing needs. The menu system is displayed on a

lighted LCD Screen at the front of the printer.

1. The menu selection highlight or pointer is moved by rotating the control wheel to the right of the

display.

2. Rotating the control wheel counterclockwise moves the highlight/pointer to the left and up.

3. Rotating the control wheel clockwise moves the highlight/pointer to the right and down.

4. Rotating the control wheel counterclockwise while editing a value decreases that value.

5. Rotating the control wheel clockwise while editing a value increases that value.

6. Pressing the center of the control wheel will activate the selected menu item or to save an edited

value.

The recommended method of printing is directly from a gcode file on the microSD card. This method does

not require a continuous connection to your computer. Gcode files can be downloaded to the microSD card

and then loaded into the printer.

To create your own gcode file(s), you may use an open source program, such as Cura or Repetier-Host (comes

pre-installed within the MicroSD Card). These programs use M200 models (typically .STL or .OBJ files) and,

using machine specific information, generate a gcode file with detailed instructions for the printer to create the

selected model. We recommend start with Cura since it includes a Slicing Engine. However, most open source

software will work.

1. Use a card reader to read the contents on the included MicroSD card. Locate and double-click the

Cura_15.04.2.exe file to start the setup program.

2. You may choose a new location for the program files or accept the default (recommended). Click

next to continue.

4 |

P a g e