Blakeslee UC20 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Посудомийна машина Blakeslee UC20. Blakeslee UC20 13 сторінок. Undercounter dishwasher
Друкувати сторінкуSECTION I INSTALLATION
The Model UC20 is suitable for both under the counter and free standing installations. Access is
required to the front and rear of the machine for service and maintenance. Therefore, all connections
should be made with flexible hoses and conduit to ensure that access can be achieved.
SHIPMENT CHECKOUT & UNCRATING
Unit is shipped with standard commercial packing, should any damage be observed on visual
inspection of the packing; notify the freight carrier immediately, as hidden damage may exist.
No special equipment is required to unpack the unit. However, care should be taken to ensure that no
damage is caused by the implements used in unpacking the machinery.
Level the machine by adjusting legs as necessary, while maintaining counter clearance dimensions.
INSTALLER WARNING
Do not turn on electrical power supply to dishwasher until water supply has first been connected and
you are ready to proceed with actual test operation of the machine.
WATER SUPPLY: Connect incoming water supply hose to 3/4" npt fitting. Water supply source must
be able to provide 140° F water minimum at 20 PSI fl ow pressure.
DRAIN: Connect ¾" hose into an elevated drain or sink.
ELECTRICAL: Check machine data plate before making any electrical connections. All supply
connections must correspond with data plate information. Use ¾" knockout hole in back of dishwasher
to connect to terminal block located on front of unit as shown below.
-2-