Cube Mountain Bike Посібник з монтажу - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з монтажу для Велосипед Cube Mountain Bike. Cube Mountain Bike 16 сторінок.

Assembly Manual

Attention: Ensure when adjusting the height of the saddle that

the seat pin is not pulled out further than the maximum height!

Failure to comply with this could result in serious material

defects or accidents! (Fig. 30)

VII. Fitting the pedals

Remove the pedals from the accessoriespackage, if you have

ordered pedals.

Identify the right-hand pedal and screw it in a clockwise

direction onto the right-hand crank (Fig. 29)

Screw the left-hand pedal in an anti-clockwise direction onto

the left-hand crank

Tighten both pedals with a 15 mm spanner and, after a few

miles, check once again that they are still tightly fitted (Fig. 30)

Fig. 29 Fitting the right-hand pedal

to the right-hand crank

Important: The right-hand crank is always on the side of the

chainset.

Attention: Failure to note the markings on the pedals or trying

to fit the pedals with force will inevitably damage the threads!

Mountain Bike

Fig. 30 Tighten the right-hand

pedal in a clockwise direction