3D Global SCALEREO Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мікроскоп 3D Global SCALEREO. 3D Global SCALEREO 4 сторінки. Stereo 3d video microscope system

1.2 Installation
Only for SCALEREO-AddOn
Detach the original tube from your optical microscope
Attach the SCALERO AddOn Module instead of the original tube
Optionally attach the tube on top of the SCALEREO AddOn Module
for SCALEREO-Desk and SCALEREO-AddOn
Connect the camera signal cable to the SPU
Connect the camera power cable to the SPU
Connect the display signal cable (display port) to the SPU
Connect the display tracking cable (USB) to the SPU
Connect the display power cable to the SPU
Connect the Control Bar cable (USB) to the SPU
Connect the power cable to the SPU
1.3 Start the system
Switch on the main switch
Briefly press the power button (front side of SPU) to start the system
Wait until the system has completely booted and 3D visualization is provided
To deinstall the system, follow the steps above, but in reverse order.
2. Usage Requirements
It is absolutely essential to observe these 3 basic requirements, otherwise the system may
not work properly!
If you notice any inadequacies while using the system, check these 3 points first.
3. Control
The entire system is controlled by a "System Control Bar".
Some of the buttons have different functions, depending if pressed short (SP) or long (LP)
General Settings
TD_QSG_SCALEREO_EN
Image
Lighting Settings
(only Desk systems)
Features
Rev. 2.0 / 19.04.2022
Headtracking
Features
Page 2 / 4