3D Global DTC133UHL Інструкція з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Монітор 3D Global DTC133UHL. 3D Global DTC133UHL 18 сторінок.

2 The device

2.1 Device description & variants

The device may be available in different variants with different characteristics. The

description and technical data applicable to the respective variant are listed in the

corresponding datasheet.

Unless otherwise indicated, the information given in these operating instruction applies to

all variants.

The type plate of the device contains various symbols whose meaning is described here:

Before using the device for the first time, read this operation instruction

completely and carefully, as it contains among other things important safety

instructions.

The device may only be operated in closed rooms. For more information,

please refer to the "Safety" section starting on page 7 of this operation

instruction.

• one autostereoscopic 3D display

• this operation instruction

• one datasheet

Optional available accessories are listed in the datasheet.

The autostereoscopic (glasses-free) 3D display is controlled via the permanently attached

signal cable (DisplayPort) with a specially processed 3D signal. Additional hardware and

software are required for this.

The display uses an integrated optical filter to optically separate the stereoscopic image

content from each other and creates several viewing areas in front of the display in which

the image content can be perceived spatially without having to wear special glasses.

The head tracking camera integrated in the display housing can detect the user's viewing

position and continuously track the 3D image on the display, so that the user can move

relatively freely in front of the display. Special headtracking software is required for this.

Manual_DTC133UHL_EN

Rev. 1.0 / 17.11.2022

6 / 18