ARO 2200 Series Посібник оператора - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник оператора для Дриль. ARO 2200 Series. ARO 2200 Series 8 сторінок. 325 r.p.m.

DISASSEMBLY/ASSEMBLY

INSTRUCTIONS

Depress trigger (22) to release valve stem (13) and "0" ring

(12).

Grease "0" ring (9) and assemble to groove in insert (10).

Assemble spring (11) and insert (10) into housing.

Grease "0" ring (8) and assemble "0" ring and

(7) to housing, securing valve components.

inlet adapter

Clean and replace screen (6) in inlet adapter.

Grease "0" rings (2) and assemble to grooves in regulator

valve (3).

Remove screw (19) and guide pin (20). releasing trigger (22)

and spring (21).

To remove oilite casting (18), unscrew from "motor" end of

housing.

HOUSING ASSEMBLY

Assemble spring (21) and trigger (22) into housing, securing

with guide pin (20) and screw (19).

Grease "0" ring (12) and assemble to groove in valve stem

(13).

Lubricate valve stem (13) with ARO 29665 spindle oil and as-

semble into housing.

Assemble regulator valve (3) to regulator body (4) securing

with snap rings (1).

Assemble regulator body (4) to inlet adapter (7).

Assemble oilite casting (18) into housing.

Fill cavity in housing (16) with ARO 29665 spindle oil and seal

with washer (15) and oil screw (14).