ARO 8365 Інструкція з експлуатації Посібник з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Дриль. ARO 8365. ARO 8365 16 сторінок. Super par-a-mat self-feed drills

Друкувати сторінку

BASIC REMOTE CONTROL FOR START

AND EMERGENCY RETRACT FUNCTIONS

MODELS 8365-( )

CONNECTED TO IN PORT

WITH MALE CONNECTOR 59474-004 +

ADAPTER 6045, 1/8' N.P.T.F.

(MALE AND FEMALE THREAD)

MALE CONNECTOR 59474-004

SUPPLY

I-WAY VALVE (MODEL 5040-10 SHOWN)

2-POSITION MANUAL RETURN

1/8' NPTF PORTS

MALE CONNECTOR 59494-004

1/8 NPTF

TUBING 59690( ). SEE TABLE

M 105

PACKAGED 10 TO A BOX

REMOTE OPERATION

Remote operation is achieved by

connecting

a 4-way valve to the remote start and retract ports, as shown above. This valve supplies power directly to the feed piston In the tool.

TO START - Move lever forward. The Unit will advance to o preset depth (adjustment screw contacts stud on valve housing),

TO RETRACT - Move lever rearward (back). The unit will retract to the initial position.

EMERGENCY RETRACT -The

unit will retract at any time the lever is moved to the rearward (back) position. The motor runs continuously as long as air pressure is present at the

air inlet to the tool. A shut-off valve should be instolled In the air inlet line to completely shut the tool off in case of an emergency.

Shown below is the some system in schematic form.