Cube RAW Split Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Внутрішнє оздоблення приміщень Cube RAW Split. Cube RAW Split 5 сторінок.

Step 7: Mount the feet and adjustable shoes. The new feet have two holes where the feet are mounted with 2 x M8x25

bolts each. Then the adjustable shoes are screwed into the outer holes.

NOTE: The old model feet are mounted with 4 x M6x25 bolts. These feet have a cross where the bolts go through.

The frame is now assembled and must be mounted on the plates. Use the

pre-drilled holes and the guiding lines as described below.

Step 8: Start by fastening the slide rail with two screws into the two pre-drilled holes in the right side of the small

plate.

Step 9: Adjust the frame according to the guiding lines in left side of the small

plate and secure it with two screws.

CUBE

D E S I G N

Cube Design A/S

Vadstedvej 212 | DK-8450 Hammel | Tlf./Phone no.: +45 86 98 74 11 | www.cube-design.dk/en | [email protected]