Cube Design Modular information desk Посібник з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з монтажу для Внутрішнє оздоблення приміщень Cube Design Modular information desk. Cube Design Modular information desk 3 сторінки.
Друкувати сторінкуAssembly manual for modular information desk
Step 1: Place the modules in the final location and un-
screw the back plates of the modules. REMEMBER the
right position of the back plates and save the screws for
later use.
Step 3: Screw the corner together. Start with driving
three screws (4.5 x 30 mm) into the side.
Step 4: Now mount the rest of the modules with screws
– back to back.
Vadstedvej 212 | DK-8450 Hammel | Phone no.: +45 86 98 74 11 | www.cube-design.dk/en | [email protected]
Step 2: Make the correct arrangement of the modules.
Level the modules by using the adjustable levelling feets
inside the modules base (oblong holes). Use a 5 mm
umbraco.
Step 3 continued: Attach the front plate using screws
(4.5 x 30mm) through the holes.
Step 5: Place the top plate loosely on top of the modules
in the correct alignment.
Cube Design A/S
CUBE
D E S I G N