3D Hobby Shop 59" AJ Slick Посібник з монтажу - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з монтажу для Літаки 3D Hobby Shop 59" AJ Slick. 3D Hobby Shop 59" AJ Slick 20 сторінок.

Друкувати сторінку
15
Assemble end of pull-pull wire as shown, double-looping the wire through the brass crimp sleeve before
crimping. Crimp the brass crimp sleeve tightly with pliers and apply a drop of thin CA to the crimp. Install
the ball links onto the rudder horn using the 2mm. Be SURE to use medium or thick CA to lock the 2mm
nuts on the rudder control horn.
Assemble rudder servo arm with servo connectors as shown. Be sure that the connectors are free to
rotate on the arm, and use medium or thick CA to lock the nuts.