AcouLab Premiere S Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери AcouLab Premiere S. AcouLab Premiere S 19 сторінок. Active loudspeaker with motional feedback & dsp

Друкувати сторінку

Connections

(1.1) Mains

Première features a quasi-universal mains input, compatible with low line

voltages ranging from 100VAC to 120VAC and high line voltages ranging

from 200VAC to 220VAC.

Thus, Première can be used on all standard mains voltages worldwide.

(1.2) Trigger

The 3.5mm trigger jack may be used to remotely control Premières power

state. To enable this feature, "Power Mode" must be set to "Trigger".

Première will wake from standby if a voltage is applied to the trigger

input, and return to a standby state when no voltage is applied.

The trigger input is galvanically isolated, supports voltages ranging from

5V DC to 18V DC, and my draw up to 10mA of current from the source

device.

Assure that the 3.5mm jack is wired according to the following diagram:

(1.3) Analog (XLR)

Fully balanced analog audio input.

Although RCA to XLR adapters may be used for interfacing Première with

single-ended audio sources, AcouLab recommends the use of balanced

connections.

Chassis