3D innovations MagneTrainer-ER Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Велотренажер 3D innovations MagneTrainer-ER. 3D innovations MagneTrainer-ER 12 сторінок. Extended range
Друкувати сторінку
- 1. Table of Contents
- 2. Cautions and Safety
- 3. Assembling Your Magnetrainer
- 4. Using the Magnetrainer with Your Legs
- 5. Using the Magnetrainer with Your Arms
- 6. Adjusting the Pedal Resistance
- 7. Keeping the Bike in Place
- 8. Using the Display
- 9. Care and Maintenance
- 10. Spare Parts
- 11. Support
- 12. Contact
- 13. Optional Accessories
- 14. Free Software
- 15. Warranty
Keeping the Bike in Place
Pedal the Bike Downward
The most important advice we can give you is to pedal downward. This will keep the bike in
place. See previous page for details.
Extend the Adjustable Leg
For maximum stability the Adjustable Leg
should be extended as far out as possible.
A longer base provides the best stability.
Keep the Dycem® Pads Clean (Optional)
There are two Dycem® pads attached to the feet of the
Adjustable Leg. Dycem® is a specialized rubber that has an
amazing grip. This keeps the bike in place on slick floors, tables
and even slippery carpet. Over time, dirt will collect on the pads,
reducing their grip. You can clean these pads with dish soap and
warm water. Cleaning the Dycem® pads is optional.
Note; if you pedal the bike forward you will likely shear off the
Dycem® pads. Remember to pedal downward.
Using the Velcro® Tether (Optional)
The MagneTrainer™ comes with two Velcro® straps. One strap has hooks and the other has
loops. These can be used to create a tether to keep the bike and the chair together.
Do I need the Tether?
Most people don't need the tether. Pedaling the bike downward will keep it in place; even on
slick surfaces. The tether may be needed if you use a rolling chair on a smooth surface. In this
case, the tether keeps the chair from rolling away from the bike.
Installation:
Attach the two Velcro® straps together to
make one loop.
The loop goes,
Around the chair leg/s or base
(keep as low as possible),
Over the top of the Fixed Leg of
the MagneTrainer™,
And under the MagneTrainer™
frame.
Adjust the length of the loop so that it is
tight when you pedal the bike.
Important!
Remove the tether when not using the
bike to avoid a tripping hazard!
5